Free Shipping On Orders Over $100

FoldAway-5™ Multi-Rack Carrier with Tie-Downs - J & V-Style - T-Slot Truck Rack Hardware


Our complete FoldAway-5™ Multi-Rack Carrier package includes attachment hardware for aero style roof racks, truck rack systems and a vehicle's traditional cross bars for maximum compatibility.

The FoldAway-5™ can carry a single recreational or touring kayak on it's side, vertically stack two kayaks, carry a canoe or large sit-on-top kayak, and transport any size SUP. Featuring a pair of quick-release fold-down frames with removable 2-boat modules for transporting wide loads. Each set of carriers are built with corrosion resistant coated steel, thick over-sized padding and heavy-duty molded parts.


  • Quick release fold-down frames for low clearance
  • Universal mounting adapters fit most load bar designs
  • Two lengths of mounting bolts for improved bar fit
  • Includes 11' load straps and tie-downs for a single kayak
  • T-slot hardware kit fits most aftermarket aero style roof racks & aluminum truck racks with top side T-slots
  • Includes a custom hex, and open end wrench for quick installation of this upgraded fit kit
  • Lifetime Limited Warranty


  • Weight: 14.5 lb
  • Dimensions (folded): 19.5" x 8.5" x 3.5"
  • Dimensions (deployed): 19.5" x 8.5" x 14"
  • Load Capacity: 2 boats - 75 lb maximum weight limit per boat
  • Compatible with most load bars up to 1.5" tall x 3.5" wide (use 80mm bolts provided)


    • Always refer to Malone’s Fit Guide for proper, correct and approved vehicle fit.
    • Bow and stern safety tie-downs are required for all Malone rooftop transport(s). Failure to correctly install and use safety tie-down lines voids all warranty and liability.
    • Carefully review instructions and register your warranty prior to first time use.
    • Malone carriers come with two lengths of mounting bolts in order to achieve the best cross bar fit. Retain unused bolts for future use with different cross bars.
    • The carrier base has a rectangular "cutout" for square cross bar fit. The "cutout" will not affect the fit or function when installed to round or oval cross bars.
    • Optional longer length mounting bolts sold separately

    What’s In The Box:

    • (2) Fold-Down Carriers
    • (2) MultiRack Extension Modules
    • (16) M6 x 1mm zinc coated 60mm Mounting Bolts
    • (16) M6 x 1mm zinc coated 80mm Mounting Bolts
    • (16) M6 T-Knobs
    • (8) Universal Mounting Brackets
    • (2) SUP Foam Blocks
    • (4) 11' Cam Buckle Load Straps
    • (4) Bow and Stern Safety Lines w/ S-Hooks
    • (1) Instruction Manual
    • (4) Custom mounting plates
    • (8) T-Slot Nuts for Truck Rack Systems
    • (8) T-Slot Nuts for Aero Style Roof Racks
    • (8) Short Mounting Plate Bolts
    • (16) Long Carrier Bolts
    • (8) Washers/Spacers
    • (2) Installation Wrench
    • (1) Instruction

    Prop 65 WARNING for California residents: